TM 5-3825-213-20
Service
Service
Inspe
Quar
Inspe
Quar
ction
terly
ction
terly
48
Adjust the steering (par. 259) and report
Value, Cylinders. Inspect the hydraulic valves
40
40
deficiencies not corrected by adjustment
to field maintenance, 3d echelon.
and cylinders for loose mounting,
Front axle assembly, wheels. Inspect the
49
49
damaged fittings, and leaks.
front axle assembly for solid mounting.
40
Replace defective or damaged hydraulic
Inspect wheels for damage.
valves and cylinders (pars. 60, 62, 66,
49
Tighten any loose U-bolts. Replace or repair
Universal joints, ball joints.
Inspect the
damaged wheels (par. 197). Adjust toe-
41
41
in (par. 260).
universal joints and propeller shaft for
Tires. Inspect the tires for condition and
50
50
loose mounting and wear.
proper inflation.
41
Replace defective propeller shaft and
50
Inflate all tires to proper pressure, 90 psi.
universal joint (par. 87).
Gear housing, cases. Inspect the differential
Replace cut or bruised tires (par. 197).
42
42
Rear axle assembly, wheels. Inspect the
51
51
housings of both axles for lubricant level
rear axle assembly for solid mounting.
and leaks.
Inspect the wheels for damage.
42
Add lubricant to the axles (LO 5-3825-213-
51
Tighten any loose U-bolts.
Replace
20). Report all leaks to field maintenance,
damaged wheels (par. 132). Adjust toe-
3d echelon.
Gears and Pinions. Inspect the axle gears
in (par. 260).
43
43
Transmission, transfer case. Inspect the
52
52
and pinions for grinding or noise in
carrier transmission for leaks, improper
operation.
lubricant level, noise, and unsatisfactory
43
Report grinding or noisy operation to field
operation. Inspect the power transfer unit
maintenance, 3d echelon.
Bearings and Shafts. Inspect the propeller
for leaks, improper lubricant level, noise,
44
44
and unsatisfactory operation.
drive shaft bearings for loose mounting
52
Add lubricant if necessary. Report any
and damage.
noise, leaks, or unsatisfactory operation
44
to field maintenance, 3d echelon.
and 209).
Drive sprockets, chains, belts. Inspect the
Tie rods, linkage. Inspect the steering tie
53
53
45
45
plow drive chain and sprockets for
rods and linkage for binding and
condition, and the chain for proper
looseness.
tension.
45
Replace defective tie rod (par. 260). Report
53
Report defective plow drive chain to field
any binding or looseness in the tie rods or
maintenance, 3d echelon.
steering linkage to field maintenance, 3d
Springs.
Inspect the springs for loose
54
54
echelon.
Booster, steering assembly.
Inspect the
shackles or brackets and broken leaves.
46
46
54
Tighten loose shackles or brackets. Report
steering hydraulic cylinders on both axles,
broken
spring
leaves
to
field
the front axle steering control valves, and
maintenance, 3d echelon.
the rear axle steering control valve for
Service brake. Inspect the service brakes
55
55
leaks and unsatisfactory operation.
for improper adjustment, improper
46
Tighten loose connections.
Replace a
operation, and worn linings. Inspect the
Hydraulic tanks.
Inspect the plow and
brake wheel cylinders and master
47
47
cylinder for improper operation. Inspect
steering hydraulic tanks for leaks and low
the brake hydraulic system for improper
fluid level.
fluid level and leaks.
47
Add fluid if necessary. Replace defective
55
Add fluid to the hydraulic system, or adjust
plow or steering hydraulic tanks (pars. 57
the brakes (par. 206).
Report any
Relief valves.
deficiencies beyond the scope of
Inspect the steering
48
48
organizational maintenance to field
mechanism for freeness and proper
maintenance, 3d echelon.
operation.
24