TM 5-3825-213-20
Figure 32. Clutch air valve assembly, removal and installation.
b. Disassembly.
a. Removal.
Disassemble the clutch
Remove the drive shaft
linkage, valve, and air chamber as illustrated in figure 35.
assembly as illustrated in figure 36.
c. Cleaning and Inspection. Clean and inspect
b. Disassembly. Disassemble the drive shaft
the air valve and air chamber for wear and condition.
assembly as illustrated in figure 37.
c. Cleaning, Inspection, and Repair.
Replace defective parts as necessary.
d. Reassembly. Reassemble the clutch air
(1) Clean all parts in an approved cleaning
valve and air chamber as illustrated in figure 35.
solvent and dry thoroughly.
e. Installation.
(2) Inspect the drive shaft for bends and
condition.
(1) Install the clutch air valve and air
(3) Inspect the bearings for wear or
chamber as illustrated in figure 34.
damage.
(2) Adjust the clutch (TM 5-3825-213-10).
87. Drive Shaft Assembly
60
