TM 5-3825-213-20
Figure 27. Housing control arm., removal and installation.
Section V. PLOW FRAME AND ACCESSORIES
b. Cleaning and Inspection. Clean the side
78. General
cutter knives and inspect for condition. Replace as
The plow frame is an all-welded construction,
necessary.
consisting of rolled steel structural members and steel
c. Installation. Install the side cutter knives as
plate sides and back. The lower edge of the frame is
illustrated in figure 28.
provided with a replaceable scraper blade. Two ver 'al
cutting knives, slightly inclined forward, are provided on
each side of the plow frame in order to cut through high
80. Shoe Assembly
snow. The plow frame slides in front of the carrier on
a. Removal. Remove the shoe assembly as
skates.
illustrated in figure 29.
b. Cleaning, Inspection, and Repair. Clean
79. Side Cutter Knives
and inspect the shoe assembly and repair or replace as
a. Removal. Remove the side cutter knives as
necessary.
c. Installation. Install the shoe assembly as
illustrated in figure 28.
illustrated in figure 29.
55
