TM 5-3825-213-20
126. Turn Signal Control Switch
130. Fuel Tank Switch
a. Removal.
a. Removal. Remove the fuel tank switch as
(1) Remove the turn signal control switch
illustrated in figure 79.
b. Cleaning and Inspection. Clean, inspect,
as illustrated in figure 77.
(2) Remove the turn signal indicator lamp
and replace defective fuel tank switch assembly.
c. Installation. Install the fuel tank switch as
as illustrated in figure 78.
b. Cleaning and Inspection. Clean and inspect
illustrated in figure 79.
the turn signal control switch for improper operation and
damage. Inspect the lamp for lack of brilliance. Replace
131. Carrier Engine Ignition Switch
damaged or defective' parts.
a. Removal.
Remove the carrier engine
c. Installation.
ignition switch as illustrated in figure 79.
(1) Install the turn signal indicator lamp as
b. Cleaning and Inspection. Clean, inspect,
illustrated in figure 78.
and replace a defective ignition switch.
(2) Install the turn signal control switch as
c. Installation.
Install the carrier engine
illustrated in figure 77.
ignition switch as illustrated in figure 79.
127. Carrier Engine Tachometer Assembly
132. Carrier Engine Coolant Temperature
a. Removal.
Remove the carrier engine
Gage Assembly
tachometer assembly as illustrated in figure 79.
a. Removal.
Remove the carrier engine
b. Cleaning and Inspection. Clean and inspect
coolant temperature gage assembly as illustrated in
the tachometer assembly for restrictions or other
damage. Replace defective tachometer as necessary.
b. Cleaning and Inspection. Clean, inspect,
c. Installation.
Install the tachometer
and replace a defective engine coolant temperature gage
assembly as illustrated in figure 79.
as necessary.
c. Installation.
Install the carrier engine
128. Fuel Tank Gage Assembly
coolant temperature gage assembly as illustrated in
a. Removal. Remove the fuel tank gage
assembly as illustrated in figure 79.
b. Cleaning and Inspection. Clean and inspect
133. Plow Engine Throttle Control Linkage
the fuel tank gage for broken lens, and damaged
a. Removal.
housing and electrical terminals.
(1) Remove throttle control from the
c. Installation.
Install the fuel tank gage
carburetor (par. 174).
assembly as illustrated in figure 79.
(2) Remove the plow engine throttle
control linkage as illustrated in figure
129. Air Pressure Gage Assembly
a. Removal. Remove the air pressure gage
assembly as illustrated in figure 79.
b. Cleaning and Inspection. Clean, inspect,
b. Cleaning and Inspection. Clean, inspect,
and replace a defective throttle control.
and replace a defective air pressure gage as necessary.
c. Installation.
c. Installation. Install the air pressure gage
(1) Install the throttle control on the
assembly as illustrated in figure 79.
carburetor (par. 174).
(2) Install the plow engine throttle control
linkage as illustrated in figure 80.
114