TM 5-3825-213-20
Figure 77. Turn signal control switch, removal and installation.
(2) Install the choke assembly on the
134. Plow Engine Choke Assembly
carburetor (par. 174).
a. Removal.
(1) Remove the choke assembly from the
135. Rotating Beacon Switch
carburetor /par. 174).
a. Removal. Remove the rotating beacon
(2) Remove the choke assembly as
switch as illustrated in figure 79.
illustrated in figure 80.
b. Cleaning and Inspection. Clean, inspect,
b. Cleaning and Inspection. Clean, inspect,
and replace a defective choke assembly.
and replace a defective rotating beacon switch.
c. Installation.
c. Installation.
Install the rotating beacon
(1) Install the choke assembly as
switch assembly as illustrated in figure 79.
illustrated in figure 80.
115