TM 5-3825-213-20
CHAPTER 6
CARRIER MAINTENANCE INSTRUCTIONS
Section I. CARRIER WHEELS AND TIRES
196. General
198. Spare Wheel and Rack Assembly
a. Removal. Remove the spare wheel and
The carrier uses four 14:00 x 24 tires with
conventional tubes and standard-type liners, mounted on
rack assembly as illustrated in figure 114.
b. Cleaning and Inspection.
steel spoke-type wheels with dismountable rims.
Clean and
inspect. Replace defective parts.
c. Installation. Install the spare wheel and
197. Wheel and Tire Assembly
a. Wheel Removal. Remove the wheel as
rack assembly as illustrated in figure 114.
instructed in figure 113.
b. Tires and Tubes.
For tire and tube
199. Wheel Bearings
maintenance instructions refer to TM 9-1870-1.
a. Removal. Remove the wheel bearings as
c. Cleaning and Inspection.
Clean and
illustrated in figure 115.
inspect. Replace defective wheels, tires, or tubes.
Note. Do not remove the bearing cups or seal
d. Wheel Installation. Install the wheel as
from the hub to lubricate unless bearing and cup are
illustrated in figure 113.
damaged.
Note.
Remove, service, and install the
b. Cleaning, Inspection, and Repair. Clean,
inspect, replace or repair defective parts as necessary.
remaining wheels in a similar manner.
c. Installation. Install the wheel bearings as
illustrated in figure 115.
Note. Replace the remaining wheel bearings
in a similar manner.
167