TM 5-3825-213-20
Figure 115. Carrier wheel bearings, removal and installation.
Section II. CARRIER AND SNOWPLOW CONTROLS
all parts. Replace a defective carrier engine accelerator
200. General
pedal as necessary.
The carrier and snowplow controls are contained
d. Reassembly.
Reassemble the carrier
within the carrier cab. The plow controls are mounted to
engine accelerator pedal as illustrated in figure 117.
the left and forward of the operator's seat.
The
e. Installation.
Install the carrier engine
transmission shift lever and transfer shift lever are
accelerator pedal as illustrated in figure 116.
mounted directly to the left of the operator's seat.
202. Brake Treadle
201. Carrier Engine Accelerator Pedal
a. Removal. Remove the brake treadle as
a. Removal.
Remove the carrier engine
illustrated in figure 116.
accelerator pedal as illustrated in figure 116.
b. Disassembly.
Disassemble the brake
b. Disassembly.
Disassemble the carrier
treadle as illustrated in figure 118.
engine accelerator pedal as illustrated in figure 117.
c. Cleaning and Inspection. Clean and inspect
171
