TM 5-3825-213-20
260. Tie Rod
a. Removal. Remove the tie rod as illustrated
in figure 175.
b. Cleaning and Inspection. Clean, inspect,
and replace a bent or damage tie rod.
c. Installation. Install the tie rod as illustrated
in figure 175.
Note. Remove and adjust the rear tie rod in a
similar manner.
261. Carrier Lifting Eye
a. Removal. Remove the carrier lifting eye as
illustrated in figure 176.
b. Cleaning and Inspection. Clean, inspect,
and replace a damaged lifting eye as necessary.
c. Installation. Install the carrier lifting eye as
illustrated in figure 176.
262. Carrier Bumper
a. Removal. Remove the carrier bumper as
illustrated in figure 170.
b. Cleaning, Inspection, and Repair. Clean,
inspect, and repair the bumper as necessary.
c. Installation. Install the carrier bumper as
illustrated in figure 170.
Figure 155. Ventilator, removal and installation.
224