TM 5-3825-213-20
Figure 153-Continued.
(2) Install the plow engine hood (fig. 109)
256. Walkway and Handrail
and carrier engine hood (fig. 111).
a. Removal.
(3) Install the transmission oil cooler cover
(1) Remove the batteries and battery box
(4) Install the electrical connectors (fig.
(2) Remove the toolbox (fig. 164).
(3) Remove the taillight and signal light
(5) Install the taillight and signal light (fig.
(4) Remove electrical connectors (fig. 65).
(6) Install the toolbox (fig. 164).
(5) Remove transmission oil cooler cover
(7) Install the battery box and batteries
(6) Remove the plow engine hood (fig.
257. Carrier Rear Fender Assembly
a. Removal.
(7) Remove the handrail and walkway as
(1) Remove fuel pump and strainer (left
illustrated in figure 170.
b. Cleaning, Inspection, and Repair. Clean,
fender only) (fig. 105).
(2) Remove reflectors (par. 252).
inspect, and repair defective parts as necessary.
c. Installation.
(3) Remove the rear fender as illustrated
in figure 171.
(1) Install the walkway and handrail as
illustrated in figure 170.
222