TM 5-3825-213-35
Figure 91. Carrier cab, removal and installation.
Note
b. Inspection and Repair. Inspect the carrier cab for
broken weldments, and dents, and the windshield, side, or
Use suitable cribbing between the two
rear windows for cracks, chips, or other damage. Repair
side doors and cab roof to attach
or re place defective parts as necessary.
lifting slings when removing carrier
cab. This will prevent damage to the
305.
Carrier Cab, Windows, and Windshield
cab roof.
Assembly Installation
b. Windshield, Side, and Rear Windows, Removal.
Remove the windshield, and side and rear windows as
a. Windshield, Side and Rear Windows Installation.
illustrated on figure 92.
Install the windshield, side and rear windows as illustrated
on figure 92.
Note
Do not remove weatherstrip from cab
b. Carrier Cab Installation.
window frames unless damaged or
(1) Install the carrier cab as instructed on figure
deteriorated.
(2) Install the operator's seat (TM 5 3825-213-
304
Carrier Cab, Windows, and Windshield
20).
Assembly Cleaning, Inspection, and Repair
(3) Install the heater ducts (TM 53825 213-20).
(4) Install carrier cab doors (TM 5-3825-213-
a. Cleaning. Clean all parts with an approved
20).
cleaning solvent and dry thoroughly.
217
