TM 5-3825-213-35
Section XVIII. PLOW AND CARRIER ENGINE CYLINDER BLOCK AND SLEEVES
258. General
b. Inspection and Repair. Inspect all cylinder block
The cylinder block is a rigid, compact 90 V-block
and sleeves for a damaged condition. Replace or repair
machined to house the major components of the engine.
worn, damaged, or defective cylinder sleeve. Measure
the cylinder block in accordance with specifications
prescribed in paragraph 4, and all parts that require
259.
Plow and Carrier Engine Cylinder Block and
dimensions.
Sleeves Removal and Disassembly
a. Removal.
261.
Plow and Carrier Engine Cylinder Block and
(1) Remove the plow and carrier engine (pars.
Sleeves Reassembly and Installation
a. Reassembly. Reassemble the plow and carrier
(2) Remove the plow and carrier timing gear
engine cylinder block and sleeves in reverse order of
cover (par. 243).
numerical sequence as illustrated on figure 74.
(3) Remove the plow and carrier engine
b. Installation.
flywheel and housing (par. 236).
(1) Install the plow and carrier engine camshaft
(4) Remove the plow and carrier engine piston
and connecting rods (par. 247).
(2) Install the plow and carrier engine
(5) Remove the plow and carrier engine
crankshaft (par. 253).
crankshaft and main bearings (par. 251).
(3) Install the plow and carrier engine piston
(6) Remove the plow and carrier engine
and connecting rods (par. 249).
camshaft (par. 255).
(4) Install the plow and carrier engine flywheel
b. Disassembly. Disassemble the plow and carrier
and housing (par. 238).
engine cylinder block in numerical sequence as illustrated
(5) Install the plow and carrier engine timing
on figure 74.
gear and cylinder-head covers (par. 245).
(6) Install the plow and carrier engine (pars.
260.
Plow and Carrier Engine Cylinder Sleeves
Cleaning, Inspection, and Repair
a. Cleaning. Clean the cylinder block and sleeves
with an approved cleaning solvent and dry thoroughly.
176
