TM 5-3825-213-35
A. Plow engine front mounting removal points.
Figure 4. Plow engine, clutch housing, and transmission assembly, removal and installation.
(2) Drain the transmission, hydraulic, and
(3) Install the oil pan shields (TM 53825-213-
lubricating systems (TM 5-3825-213-10).
20).
(3) Close shutoff valve and remove fuel lines
(4) Install the necessary oil, heater, and
(TM 5-3825-213-20).
coolant lines (TM 5-3825-213-20).
(4) Remove battery cable and wiring (TM
(5) Install the battery cable and wiring (TM 5-
53825-213-20).
3825-213-20).
(5) Remove oil pan shield (TM 5-3825-213-
(6) Fill the lubricating system (LO 53825-213-
20).
20).
(6) Remove transmission oil cooler (TM 5-
(7) Fill the coolant system (TM 5-3825213-
3825-213-20).
10).
(7) Remove alinement shaft (TM 53825-213-
(8) Install the fuel lines and open the shutoff
20).
valves (TM 5-3825-213-10).
(8) Remove hydraulic steering and plow lines
(9) Install the plow engine hood (TM 5-3825-
(TM 5-3825-213-20).
213-20).
(9) Remove the carrier engine hood (TM 5-
3825-213-20).
50. Carrier Engine and Torqmatic Converter
(10) Remove the radiator (par. 210).
Assembly
(11) Remove the carrier engine heater (TM 5-
3825-213-20).
a. Removal.
(12) Remove the starter (TM 5-3825-213-20).
(1) Drain the coolant system (TM 5-3825-213-
10).
(13) Remove the carrier engine and converter
assembly as instructed on figure 5.
37