TM 5-3825-213-35
(6) Disconnect the speedometer cable (TM 5-
3825-213-20).
(7) Remove the torqmatic transmission
assembly as instructed on figure 6.
b. Installation.
(1) Install
the
torqmatic
transmission
assembly a s instructed on figure 6.
(2) Install the plow engine (par. 49).
(3) Install the universal joints (TM 5-3825-
213-20).
(4) Install the sending unit wiring (TM 5-3825-
213-20).
(5) Install hydraulic lines (TM 5-825-213-20).
(6) Install the speedometer cable (TM 5-
3825-213-20).
(7) Fill the torqmatic transmission (LO 53825-
213-20).
52. Transfer Case Assembly
a. Removal.
(1) Remove the front and rear differential
drive shafts and jack shaft (TM 5-3825-
213-20).
Note
Mark each end of the transmission
jack shaft for proper alinement when
installing.
(2) Remove hydraulic lines (TM 5-3825- 213-
20).
(3) Disconnect shift lever, brake cable, and
bracket (TM 5-3825-213-20).
(4) Remove governor electrical connection
A. Front removal points.
(TM 5-3825-213-20).
B. Rear removal points.
(5) Disconnect speedometer cable (TM 5-
3825-213-20).
Figure 5. Carrier engine and torque converter
(6) Remove the transfer case assembly as
assembly, removal and installation.
instructed on figure 7.
b. Installation.
51. Torqmatic Transmission Assembly
(1) Install the transfer case assembly as
instructed on figure 7.
a. Removal.
(2) Connect the speedometer cable (TM 5-
(1) Drain the torqmatic transmission (TM 5-
3825-213-20).
3825-213-10).
(3) Install the governor electrical connection
(2) Remove the hydraulic lines (TM 5-
(TM 5-3825-213-20).
3825213-20).
(4) Connect the shift lever, brake cable, and
(3) Remove sending unit wiring (TM 5- 3825-
bracket (TM 5-3825-213-20).
213-20).
(5) Install the hydraulic lines (TM 5- 3825-
(4) Remove universal joints (TM 5-3825-213-
213-20).
20).
(5) Remove the plow engine (par. 49).
39