TM 5-3825-213-35
26
Washer, lock, No. 10 (4 rqr)
1
Screw, machine, No. 10-32 x 3/4 in. (6 rqr)
2
Washer, lock, No. 10 (6 rqr)
27
End plate
3
Regulator cover
28
Preformed packing
4
Plug, pipe, 1/4 in.
29
Screw, machine, No. 6-32 x 1 3/4 in. (3 rqr)
30
Washer, lock, No. 6 (3 rqr)
5
Screw, machine, No. 6-32 x 3/4 in. (4 rqr)
6
Contact panel assembly
31
Coil pot end plate
7
Spacer (4 rqr)
32
Screw, machine, No. 10-32 x 1/4 in.
8
Screw, machine, No. 6-32 x 5/16 in. (4 rqr)
33
Washer, lock, No. 10
34
Washer, flat, No. 10
9
Washer, lock, No. 6 (4 rqr)
10
Cover
35
Coil core
11
Preformed packing
36
Paralleling coil
12
Screw, machine, No. 6-32 x 1/2 in. (2 rqr)
37
Operating coil
38
Coil pot
13
Washer, lock, No. 6 (2 rqr)
14
Washer, fat, No. 6 (2 rqr)
39
Shim (as rqr)
15
Insulator washer (2 rqr)
40
Bimetal ring
16
Insulator
41
Spacer
42
Armature
17
Insulator
18
Contact screw plate
43
Screw, - machine, No. 6-32 x 1/2 in. (4 rqr)
19
Contact screw electrical lead
44
Washer, lock, No. 6 (4 rqr)
20
Contact screw plate
45
Regulator element
46
Preformed packing
21
Insulator plate
47
Screw, machine, No. 6-32 x 3/16 in.
22
Contact screw
23
Carbon pile
48
Washer, lock, No. 6
24
Carbon pile tube
49
Tab lock
25
Screw, machine, No. 10-32 x 3/8 in. (4 rqr)
Figure 1-Continued.
cause of interference by the trial-and-error method of
46. Testing of Radio Interference
replacing each capacitor in turn until the cause of
Suppression Components
interference is located and eliminated.
Test the capacitors for leaks and shorts on a capacitor
tester. Replace a defective capacitor. If test equipment
is not available and interference is indicated, isolate the
32
