TM 5-3825-213-35
1
Flywheel
7
Snap ring
2
Seal
8
Bearing, roller
3
Snap ring
9
Rivet, 6/16 x 1 1/4 in. (16 rqr)
4
Snap ring
10
Turbine hub
5
Bearing race
11
Flywheel flex disk indexing dowel pin
6
Converter turbine
12
Ring gear.
D. Torqmatic converter flywheel and turbine.
1
Bolt, hex hd, 3/416 (8 rqr)
8
Gasket
2
Washer, lock, 3/4 in. (8 rqr)
9
Converter output shaft
3
Output flange washer
10
Seal
4
Output flange
11
Seal
5
Bolt, hex hd, 1/2-13 x 1 1/2 in. (6 rqr)
12
Bearing
6
Washer, lock, 1/2 in. (6 rqr)
13
Output flange dual oil seal
7
Bearing container
E. Output shaft.
1
Thrust washer, special
6
Stator, second
2
Nut, special
7
Stator backplate
3
Stator, first
8
Stator freewheel roller
4
Stator freewheel
9
Pin, 0.250 dia x 0.70 in., special
5
Thrust washer, special
10
Freewheel roller spring
F. Torqmatic converter stators.
1
Bolt, hex hd, 3/824 x 1 3/4 in. (31 rqr)
7
Converter pump hub
2
Bolt, hex hd, 3/824 x 1 1/8 in. (8 rqr)
8
Seal
3
Lock strip
9
Screw, rd hd, drive, No. 6 x 3/8 in. (6 rqr)
4
Bearing retainer
10
Converter balance weight (3 rqr)
5
Bearing retainer
11
Converter pump
6
Bearing, double low
G. Torqmatic converter pump.
Figure 75. Continued.
Section II. CARRIER TORQMATIC TRANSMISSION ASSEMBLY
transmission is capable of quick shifting at full power at
266. General
wide open throttle.
The torqmatic transmission assembly is designed to
work in conjunction with the torqmatic converter. Four
multiple disk, oil cooled, friction clutches, which are
267. Torqmatic Transmission Assembly Removal and
hydraulically applied and spring released, control the
Disassembly
planetary gear train.
The planetary gearing is a
a. Removal. Remove the torqmatic transmission
compound planetary gear train in constant mesh. The
assembly (par. 51).
friction plates are steel with sintered bronze facings and
Disassemble the torqmatic
b. Disassembly.
the reaction plates are plain steel. An auxiliary pump,
transmission assembly in numerical sequence as
integral with the transmission, provides the hydraulic
illustrated on figure 76.
pressure to engage the range clutches. The transmission
has three speeds forward and one reverse.
The
181