TM 5-3825-213-35
1
Wiper
8
Screw, machine, No. 10-24 x 1/4 in.
2
Adapter
9
Washer, lock, No. 10
3
Seal
10
Plunger
4
Seal
11
Ring, retainer
5
Seal
12
Gland
6
Piston
13
Cylinder body
7
Ring, retaining
Figure 17. Snowplow hydraulic lift cylinder assembly, disassembly
and reassembly, exploded view.
Section II. SNOWPLOW FAN HOUSING ROTATING HYDRAULIC CYLINDER ASSEMBLY
86.
General
a. Cleaning.
Clean all parts in an approved
cleaning solvent and remove foreign matter from
The fan housing rotating hydraulic cylinder
passages.
assembly is a double-acting cylinder. The cylinder. The
cylinder is controlled by the operator rotating the fan
Caution
housing to position desired for spreading operation.
Dirt and dust can create a serious
malfunction to the plow hydraulic
87.
Snowplow Fan Housing Rotating Cylinder
system. Be sure to keep the work
Assembly Removal and Disassembly
area free of these elements.
a. Removal. Remove the fan housing rotating
b. Inspection and Repair. Inspect all parts for
cylinder assembly (TM 5 825213-20).
wear, scoring, or other damage. Replace or repair
defective parts as necessary.
b. Disassembly. Disassemble the fan housing
rotating cylinder assembly in numerical sequence as
Caution
illustrated on figure 18.
Do not use compressed air near
exposed parts because of dirt and
88.
Snowplow Fan Housing Rotating Cylinder
water in the air system.
Assembly Cleaning, Inspection, and Repair
64