TM 5-3825-213-35
234.
Plow and Carrier Engine Distributor and
b. Disassembly. Disassemble the plow and carrier
engine distributor and governor drive assemblies in
Governor
Drive
Assembly
Reassembly
and
numerical sequence as illustrated on figure 67.
Installation
a. Reassembly. Reassemble the plow and carrier
233.
Plow and Carrier Engine Distributor and
engine distributor and governor drive assembly in the
Governor Drive Assembly Cleaning, Inspection, and
reverse of numerical sequence illustrated on figure 67.
Repair
b. Installation.
a. Cleaning. Clean all parts with an approved
(1) Install the plow and carrier distributor and
cleaning solvent and dry thoroughly.
governor drive assembly as instructed on
b. Inspection and Repair. Inspect all parts for a
defective condition. Replace or repair worn, damaged, or
(2) Install the crankcase cover (B fig. 61).
defective parts.
(3) Install the plow and carrier engine water
pump, impeller and seal (par. 216).
1
Tapered pin
6
Woodruff key, No. 406
2
Governor drive gear
7
Plug, pipe, 18-27
3
Accessory drive shaft
8
Sleeve bearing (4 rqr)
4
Thrust washer
9
Dowel pin (2 rqr)
5
Accessory drive gear
10
Accessory drive housing.
Figure 67. Plow and carrier engine distributor and governor drive assembly, exploded view.
163
