TM 5-3825-213-35
Section V. PLOW AND CARRIER ENGINE OIL COOLER ASSEMBLIES
197. General
199. Plow and Carrier Engine Oil Cooler Assembles
Cleaning, Inspection, and Repair.
The oil cooler is externally mounted to the engine
located on the right side near the fan assembly. The oil
a. Cleaning. Clean an parts with an approved
cooler is provided with a number of passages through
cleaning solvent and dry thoroughly.
which oil flows under pressure. Cooling water surrounding
b. Inspection and Repair. Inspect all parts for de-
the passages provides a heat-exchange medium and
fective condition. Replace or repair worn, damaged, or
stabilizes the temperature of the engine oil.
defective parts.
198. Plow and Carrier Engine Oil Cooler Assemblies
200. Plow and Carrier Engine Oil Cooler Assemblies
Removal and Disassembly
Reassembly and Installation.
a. Removal. Remove the plow and carrier engine oil
a. Reassembly. Reassemble the plow and carrier
coolers (TM 5-3825-213-20).
engine oil coolers in reverse of numerical sequence
illustrated on figure 54.
b. Disassembly. Disassemble the plow and carrier
b. Installation. Install the plow and carrier engine oil
engine oil coolers in numerical sequence as illustrated on
coolers (TM 5-3825-213-20).
1
Reducer
9
Washer, lock, 3/8 in. (6 rqr)
2
Screw, cap, 3/8-16 x 3/4 in. (6 rqr)
10
End cover
3
Washer, lock, 3/8 in. (6 rqr)
11
Gasket
4
End cover
12
Plug, special
5
Gasket
13
Reducer
6
Plug, special
14
Reducer
7
Reducer
15
Cooler body
8
Screw, cap, 3/8-16 x 3/4 in. (6 rqr)
Figure 54. Plow and carrier engine oil cooler assemblies,
disassembly and reassembly, exploded view.
137