TM 5-3825-213-35
Figure 42. Auger gearcase and fan housings removal and installation.
Disassembly.
Disassemble the fan and
b.
167.
Fan
and
Auger
Gearbox
Assembly
auger gearcase assembly in numerical sequence as
Reassembly and Installation
illustrated on figure 43.
Reassembly. Reassemble the fan and auger
a.
166.
Fan and Auger Gearcase Assembly Cleaning,
gearbox assembly in reverse of the numerical sequence
as illustrated on figure 43.
Inspection, and Repair
b.
Installation.
Cleaning. Clean all parts in an approved
a.
(1) Install the fan and auger gearbox
cleaning solvent and remove all gasket residue.
assembly as instructed on figure 42.
Inspection and Repair. Inspect all parts for
b.
(2) Install the fan blower blades (TM 5-
wear, chips, breaks, or other damage. Repair or replace
3825-213-20).
defective parts as necessary.
(3) Connect the spider to the coupling disk
as instructed on figure 40.
109