TM 5-3825-213-35
Inspection and Repair. Inspect all parts for
b.
161.
Auger Drive Shaft Assembly Removal and
wear, deterioration, bends, or other damage. Repair or
Disassembly
replace defective parts as necessary.
a.
Removal.
163.
Auger Drive Shaft Assembly Reassembly and
(1) Remove the shaft guard (TM 5-3825-
Installation
213-20).
(2) Refer to paragraph 165 and remove the
Reassembly. Reassemble the auger drive
a.
fan and auger gearcase.
shaft assembly in reverse of numerical sequence as
(3) Remove the auger drive shaft assembly
illustrated on figure 41.
as instructed on figure 40.
b.
Installation.
Disassembly. Disassemble the auger drive
b.
(1) Install the auger drive shaft assembly as
shaft assembly in numerical sequence as illustrated on
instructed on figure 40.
(2) Refer to paragraph 167, and install the
fan and auger gearcase.
162.
Auger Drive Shaft Assembly
Cleaning,
(3) Install the shaft guard (TM 5-3825-213-
Inspection, and Repair
20).
Cleaning. Clean all parts in an approved
a.
cleaning solvent and dry thoroughly.
Figure 40. Auger drive shaft assembly, removal and installation.
107