TM 5-3825-213-20
c. Installation. Install the rear wheel steering
156. Plow Engine Manifold Vacuum Gage Assembly
lock and unlock control switch as illustrated in figure 82.
a. Removal.
Remove the plow engine
manifold vacuum gage assembly as illustrated in figure
159. Personnel and Engine Heaters Control Boxes
b. Cleaning and Inspection. Clean, inspect,
a. Removal. Remove the personnel heater
and replace a defective plow engine manifold vacuum
control box as illustrated in figure 84.
b. Disassembly.
Disassemble the heater
gage assembly as necessary.
c. Installation. Install the plow engine manifold
control box as illustrated in figure 85.
vacuum gage assembly as illustrated in figure 82.
Note Disassemble the remaining control
157. Plow Engine Ignition Switch
boxes in a similar manner.
a. Removal. Remove the plow engine ignition
switch as illustrated in figure 82.
c. Cleaning, Inspection, and Repair. Clean
b. Cleaning and Inspection. Clean, inspect,
and inspect all parts for damaged condition and replace
and replace a defective plow engine ignition switch as
as necessary.
necessary.
d. Reassembly. Reassemble the personnel
c. Installation. Install the plow engine ignition
heater control box as illustrated in figure 85.
switch as illustrated in figure 82.
e. Installation. Install the personnel heater
control box as illustrated in figure 84.
158. Rear Wheel Steering Lock and Unlock Control
160. Defroster Motor Blower Switch
Switch
a. Removal. Remove the
a. Removal. Remove the rear wheel steering
defroster motor
blower switch as illustrated in figure 84.
lock and unlock control switch as illustrated in figure 82.
b. Cleaning and Inspection.
b. Cleaning and Inspection. Clean, inspect,
Clean, inspect,
and replace a defective defroster motor
blower switch as
and replace a defective rear wheel steering lock and
necessary.
unlock control switch as necessary.
c. Installation.
Install the
defroster motor
blower switch as illustrated in figure 84.
124