TM 5-3825-213-20
a. Removal.
Remove the dome light
assembly as illustrated in figure 54.
b. Disassembly. Disassemble the dome light
assembly as illustrated in figure 66.
c. Cleaning, Inspection, and Repair.
(1) Clean all parts.
(2) Inspect the dome light assembly for
defective wiring, cracked or broken
lens, cracks or breaks.
(3) Replace or repair defective parts.
d. Reassembly. Reassemble the dome light
assembly as illustrated in figure 66.
e. Installation. Install the dome light assembly
as illustrated in figure 54.
117. Auxiliary Light Assembly
a. Removal.
Remove the auxiliary light
assembly as illustrated in figure 67.
b. Disassembly. Disassemble the auxiliary
light assembly as illustrated in figure 68.
c. Cleaning, Inspection, and Repair.
(1) Clean all parts.
(2) Inspect the auxiliary light assembly for
defective wiring, broken or cracked
lens, cracks or breaks.
(3) Replace or repair defective parts.
d. Reassembly.
Reassemble the auxiliary
light assembly as illustrated in figure 68.
e. Installation.
Install the auxiliary light
assembly as illustrated in figure 67.
118. Blackout Stoplight Assembly
a. Removal. Remove the blackout spotlight
Figure 56. Dimmer switch, removal and installation.
assembly as illustrated in figure 69.
b. Disassembly. Disassemble the blackout
115. Rear Signal Light Assembly
stoplight assembly as illustrated in figure 70.
a. Removal. Remove the rear signal light
c. Cleaning, Inspection, and Repair.
(1) Clean all parts.
assembly (fig. 65).
(2) Inspect
the
blackout
stoplight
b. Disassembly. Disassemble the rear signal
assembly for defective wiring, cracked
light assembly (fig. 58).
or broken lens, cracks, or breaks.
c. Cleaning, Inspection, and Repair.
(3) Replace or repair defective parts.
(1) Clean all parts.
d. Reassembly.
Reassemble the blackout
(2) Inspect the rear signal light assembly
stoplight assembly as illustrated in figure 70.
for defective wiring, cracked or broken
e. Installation. Install the blackout stoplight
lens, cracks, or breaks.
assembly as illustrated in figure 69.
(3) Replace or repair defective parts.
d. Reassembly. Reassemble the rear signal
119. Rear Steering Solenoid Valve
light assembly (fig. 58).
e. Installation. Install the rear signal light
a. Removal.
Remove the rear steering
assembly (fig. 65).
solenoid valve as illustrated in figure 71.
116. Dome Light Assembly
92