TM 5-3825-213-35
1
Screw
7
Nut, 3/8-24 (8 rqr)
2
Guard
8
Washer, lock, 3/8 in. (8 rqr)
3
Screw, machine, 10-32 x 3/4 in.
9
Screw, cap, 3/8-24 x 1 in. (8 rqr)
4
Screw
10
Radiator
5
Shroud
11
Draincock
6
Cap
A. Plow engine radiator.
Figure 58 - Continued.
b. Inspection. Inspect radiators visually for sediment
212. Plow and Carrier Engine Radiators Reassembly
from water which has leaked and evaporated. Mark all
and Installation
leaks.
a. Reassembly. Reassemble the carrier or plow
engine radiators in the reverse of numerical sequence as
c. Testing. Seal the radiators inlet, outlet, and
illustrated on figure 58.
overflow tubes. Immerse the radiator in water and apply
b. Installation.
low pressure compressed air to the filler port. Air
(1) Install the carrier engine radiator on carrier
pressure between 3 and 5 psi provides the best test.
frame as instructed on figure 57.
Higher pressures often cause sediment deposits to seal
(2) Install the carrier engine radiator hose (TM
leaks. Mark all leaks.
5-3825-213-20).
(3) Install the carrier and plow engine hoods
d. Repair. Solder all leaks. Straighten bent fins.
and plow engine radiator (TM 5-3825-213-
Inspect all parts for defective condition. Replace or repair
20).
worn, damaged, or defective parts.
(4) Install the plow engine radiator hose (TM 5-
3825-213-20).
(5) Fill the coolant system.
147