TM 5-3825-213-35
CHAPTER 7
PLOW REPAIR INSTRUCTIONS
Section I. PLOW TRANSMISSION, CLUTCH HOUSING, AND CLUTCH ASSEMBLY
144.
Plow Engine Clutch Housing and Clutch
141. General
Assembly Reassembly and Installation
The plow engine clutch assembly mounted on the
plow engine flywheel is air-operated. The torque of the
a. Reassembly.
engine is transmitted by the clutch assembly to the
(1) Reassemble the plow engine clutch
snowplow transmission assembly. A selector lever in
assembly in the reverse of the numerical
the cab enables the operator to select high or low fan
sequence as illustrated on figure 34.
and auger speed for snow removal operation.
(2) Reassemble the clutch housing assembly
in the reverse of the numerical sequence
142.
Plow Engine Clutch Housing and Clutch
as illustrated on figure 33.
Assembly Removal and Disassembly
b. Installation.
a. Removal.
(1) Install the plow engine clutch assembly as
(1) Remove the plow transmission assembly
instructed on figure 32.
(2) Install the transmission assembly (par.
(2) Remove the plow engine clutch assembly
as instructed on figure 32.
b. Disassembly.
145. Plow Transmission Assembly Removal and
(1) Disassemble the plow engine clutch
Disassembly
assembly in the numerical sequence as
a. Removal. Remove the plow transmission (par.
illustrated on figure 33.
(2) Disassemble the plow engine clutch
b. Disassembly.
Disassemble the snowplow
housing assembly in numerical sequence
transmission assembly in order of numerical sequence
as illustrated on figure 34.
as illustrated on figure 35.
143.
Plow Engine Clutch Housing and Clutch
146.
Plow Transmission
Assembly Cleaning,
Assembly Cleaning, Inspection, and Repair
Inspections and Repair
a. Cleaning. Clean all metal parts in an approved
a. Cleaning-. Clean all parts in an approved
cleaning solvent and dry thoroughly.
cleaning solvent, remove gasket residue and dry
b. Inspection and Repair. Inspect all parts for
thoroughly.
wear, breaks, or other damage. Repair or replace
b. Inspection and Repair.
defective parts as necessary.
(1) Inspect the gears for broken or chipped
teeth.
89
