TM 5-3825-213-35
1
Screw, cap, 1/4-20 x 5/8 in. (12 rqr)
2
Washer, lock, 1/4 in. (12 rqr)
3
Diaphragm cover
4
Nut, 1/4-28
5
Diaphragm support plate
6
Diaphragm
7
Diaphragm support plate
8
Diaphragm stem
9
Return spring
10
Cap
11
Gasket
12
Spring
13
Exhaust valve
14
0-ring
15
Screw, cap, 1/4-20 x 1 in. (4 rqr)
16
Washer, lock, 1/4 in. (4 rqr)
17
Outlet cap
18
Gasket
19
Plug, pipe, 3/8 in.
20
Valve body
Figure 28. - Continued.
Section VI. REAR STEERING LOCK AIR CHAMBER ASSEMBLY
131.
Rear Steering Lock Air Chamber Assembly
129. General
Cleaning, Inspection, and Repair
The rear steering lock air chamber functions when
the lock switch on the instrument panel is turned to the
a. Cleaning. Clean all parts with an approved
ON position. The solenoid valve is opened permitting
cleaning solvent and dry thoroughly.
air to pass to the steering lock air chamber. The
b. Inspection and Repair. Inspect all parts for
chamber raises the lockpin permitting the rear wheels to
defective condition. Replace or repair worn, damaged,
be turned either right or left.
or defective parts.
130.
Rear Steering Lock Air Chamber Assembly
132.
Rear Steering Lock Air Chamber Assembly
Removal and Disassembly
Reassembly and Installation
a. Removal. Remove the rear steering lock air
a. Reassembly. Reassemble the rear steering lock
chamber (TM 5-3825-213-20).
air chamber assembly in the reverse numerical
b. Disassembly. Disassemble the rear steering
sequence illustrated on figure 29.
lock air chamber in numerical sequence as illustrated on
b. Installation. Install the rear steering lock air
chamber assembly (TM 5-3825-213-20).
83