TM 5-3825-213-20
Figure 41. Plow and carrier engine starter brush replacement.
(2) Install the spark plug wiring (fig. 42).
97. Plow and Carrier Engine Rocker Arm Cover and
Valve Adjustment
98. Plow and Carrier Engine Cranking Device
a. Cover Removal.
a. Removal. Remove the engine cranking
(1) Remove spark plug wiring (fig. 42).
device as illustrated in figure 48.
(2) Remove the rocker arm cover as
b. Disassembly.
Disassemble the engine
illustrated in figure 47.
cranking device as illustrated in figure 49.
b. Valve Adjustment. Adjust the valves as
c. Cleaning, Inspection, and Repair. Clean
illustrated in figure 46.
and inspect all parts and replace as necessary.
c. Cleaning and Inspection. Clean and inspect
d. Reassembly.
Reassemble the engine
the cover and arm assemblies for breaks, wear or other
cranking device as illustrated in figure 49.
damage. Replace defective parts as necessary.
e. Installation. Install the engine cranking
d. Cover Installation.
device as illustrated in figure 48.
(1) Install the rocker arm cover as
illustrated in figure 47.
73