TM 5-3825-213-20
Figure 49. Plow and carrier engine cranking device, disassembly
and reassembly, exploded view.
Section II. CARRIER AND CARRIER ENGINE ELECTRICAL SYSTEM
c. Installation. Install the alternator drive belt
99. General
as illustrated in figure 50.
The carrier and carrier engine electrical system
d. Adjustment. Adjust the alternator drive
is comprised of an alternator, regulator, rectifier, and
belts (TM 5-3825-213-10).
accessories such as horn, lights, and switches used in
the operation of the snow removal unit.
101. Alternator Assembly
a. On-Unit Testing.
100. Alternator Drive Belt
a. Removal. Remove the alternator drive belt
(1) Remove rectifier-to-alternator cable
and test the cable for open circuits
as illustrated in figure 50.
with an ohmmeter.
Test from
b. Cleaning and Inspection. Clean, inspect,
designated pin A at one end to socket
and replace a defective belt.
A at the other end, from pin B to
socket B, and so on. There should
83