TM 5-3825-213-10
B. Plow and hydraulic lines installation.
Figure 5. Continued.
(c)
Move selector valve control lever
9.
Equipment Conversion
(fig. 6) to FAN BLOWER position
and move snow chute and fan
a. General. This snow removal unit is designed
blower control lever as necessary
to expel snow in two different ways. By using the snow
to aline fan blower housing and
direction chute in the banking or truck loading position,
snow direction chute as shown in
and the fan blower housing for spreading, the delivery of
snow can be closely controlled.
b. Conversion.
Caution
(1) Banking and truck loading positions.
Do not turn fan blower left of center
(a) Start carrier engine (fig. 12).
with snow chute installed or damage
(b) Extend snow direction chute (fig.
will result.
(d)
To bank with snow direction chute
down, release the safety latch (fig.
7) and with selector control valve
19