TM 5-3825-213-35
1
Seal
2
Intermediate range piston
R. Intermediate range piston.
1
Screw, cap, special (8 rqr)
4
Seal
2
Housing
5
Bearing
3
Seal
6
Bearing
S. Bearing housing assembly.
Figure 76-Continued.
Section III. PARKING BRAKE ASSEMBLY
272. Parking Broke Assembly Cleaning, Inspection,
270. General
and Repair
The parking brake assembly is mounted on the
front output shaft of the transfer case. The parking
a. Cleaning. Clean all parts with an approved
brake is mechanically controlled by the operator in the
cleaning solvent and dry thoroughly.
cab. The parking brake assembly consists of the
b. Inspection and Repair. Inspect the parts for
brakebands, pins, springs, and cam.
breaks, wear, or other damage. Replace defective
lining as necessary.
271. Parking Brake Assembly Removal
a. Remove the parking brake cable (TM-5-3825-
273. Parking Brake Assembly Installation
213-20).
a. Install the parking brake assembly as instructed
b. Remove the drum and brakeband as instructed
on figure 77.
on figure 77.
b. Install the parking brake cable (TM-5-3825-213-
20).
191