TM 5-3825-213-20
Figure 102. Plow and carrier engine speed governor assembly,
removal and installation.
Section VII. PLOW AND CARRIER ENGINES LUBRICATION SYSTEM
parts as necessary.
184. General
c. Installation. Install the oil filter as illustrated
The plow and carrier engines have pressurized
in figure 103.
oil systems which supply oil to all moving parts of the
engines. It is important that the oil system be kept clean,
186. Plow and Carrier Engine External Oil Lines and
so the oil will circulate freely. At normal operating speed
the oil pressure will range between 40 and 60 psi.
Fittings
a. Removal. Remove the external oil lines
185. Plow and Carrier Engine Oil Filter
and fittings as illustrated in figure 104.
a. Removal. Remove the oil filter as illustrated
b. Cleaning and Inspection. Clean, inspect,
in figure 103.
and replace damaged lines and fittings as necessary.
b. Cleaning and Inspection. Clean, service,
c. Installation. Install the external oil lines and
and inspect the oil filter and lines for damaged fittings,
fittings as illustrated in figure 104.
breaks, or broken mounting straps. Replace defective
148